When comparing wide plank engineered hardwood flooring, confirm the exact width and length, total thickness, oak face thickness, construction, carton coverage, and carton weight before selecting colors. For distributors and large retailers, these details belong in one consistent product record so purchasing teams, showroom staff, and receiving teams work from the same information.
FineFloor’s Amara Collection provides a practical example: European oak planks measuring 10.25″ × 86.6″, approximately 260 × 2200mm, with a 5/8″ total thickness and a 4mm sawn-cut oak veneer. The checklist below explains what to record, what to keep separate, and what to request before confirming a bulk purchase.
1. Record Width and Length as Separate Specifications
“Wide plank” describes a format, but it does not replace actual measurements. A product comparison should show both width and length, with the measurement order clearly identified.
Amara is specified as 10.25″ wide × 86.6″ long, approximately 260 × 2200mm. Keep the inch dimensions and approximate metric dimensions together when preparing product sheets for U.S. sales teams.
This distinction also matters for showroom displays. A small sample can introduce a color, while a longer board display gives customers more context for the plank proportions and grain appearance. Use each display for a clear purpose rather than expecting a small color chip to communicate the entire format.
The supplied dimensions do not establish a carton’s board count or length distribution. Request those details separately if your purchasing or merchandising records require them.
2. Separate Total Thickness, Oak Face, and Construction
Total thickness and oak face thickness describe different parts of the product. Record them in separate fields so neither disappears into a shortened specification.
For Amara, the total thickness is 5/8″, and the face is 4mm sawn-cut oak veneer. The construction is plywood. Do not describe the full board as solid oak or treat the 4mm face as the total board thickness.
These details help buyers compare documented configurations without relying on broad descriptions such as “thick oak flooring.” They also give showroom staff precise language for explaining the product.
Keep the appearance grade separate from the construction. Amara is Natural Grade. Its European oak species designation identifies the wood; it does not identify the finished flooring’s manufacturing country.
When reviewing another collection, repeat the same fields rather than carrying Amara’s specifications into a different product record.
3. Verify Carton Coverage and Weight Together
Carton area and carton weight answer different purchasing questions. Coverage connects the order quantity to the area being purchased; weight provides a carton-level reference for handling and shipment planning.
Use this checklist when preparing an Amara purchasing record:
| Item to verify | Amara Collection specification | Buyer’s recording note |
|---|---|---|
| Brand and collection | FineFloor, Amara Collection | Keep both names on the product record |
| Product type and species | Engineered Hardwood Flooring; European Oak | Separate product type from wood species |
| Width × length | 10.25″ × 86.6″; approximately 260 × 2200mm | Label width and length clearly |
| Total thickness | 5/8″ | Record separately from the oak face |
| Oak face | 4mm sawn-cut oak veneer | Preserve thickness and cut description |
| Construction and grade | Plywood; Natural Grade | Keep as separate fields |
| Finish | Matte UV-cured urethane | Retain the full finish description |
| Texture and edge | Light wire brushed; micro bevel | Use consistent showroom terminology |
| Installation | Glue down or nail down | Request the applicable installation instructions |
| Coverage per carton | 36.942 sq.ft. | Use the stated figure in quantity calculations |
| Weight per carton | 73.41 lbs. | Keep separate from pallet or shipment weight |
| Warranty | 50-year residential / 5-year light commercial | Subject to warranty terms and conditions |
For example, 20 cartons represent 738.84 sq.ft. and a combined stated carton weight of 1,468.2 lbs. This calculation does not establish pallet dimensions or total shipping weight. Confirm those shipment details separately.
Keep the original carton figures in your records rather than replacing them with rounded values.
4. Confirm Color and Surface Alongside the Numbers
A complete specification should support visual selection as well as purchasing administration. Once the format is clear, compare physical samples using the correct color name and surface description.
[Laguna Light Natural European Oak Engineered Hardwood Flooring] illustrates the Amara format with a light natural oak tone, soft warmth, and fine grain. Its appearance provides a reference for modern residential, Scandinavian, and open-plan display settings.
For a dealer presentation, pair the sample with a clearly labeled specification card. Show the color name, dimensions, finish, texture, and carton coverage together so the visual selection remains connected to the correct product.
Amara’s finish is matte UV-cured urethane, with a light wire-brushed texture. Do not replace that wording with “oil finished.”
Natural color and grain variation should remain part of the discussion. Use physical samples when confirming a selection, and avoid presenting one photographed board as a guarantee of an identical appearance across every plank.
5. Complete the Purchasing Brief and Check Related Products Separately
Before contacting an engineered hardwood flooring supplier, assemble a brief that includes your company, sales market, intended colors, required quantity, and the specifications you need confirmed. State whether the quantity is expressed in square feet or cartons.
For wholesale engineered hardwood flooring inquiries, request the product information, dealer sample options, and current supply information relevant to your selection. Keep unconfirmed commercial conditions as questions in the inquiry rather than assumptions in the purchasing record.
If a project also requires flooring and stairs, compare their specifications separately. A separate coordinated red oak example comprises 3000 × 190 × 20mm flooring with a 6mm oak face, paired with engineered stair treads and stair risers with a 20mm total thickness and 2mm oak face. Coordination concerns color, species, and overall appearance; the constructions and face thicknesses differ. These are separate from Amara specifications and do not establish an Amara stair option.
Discuss Your Amara Selection with FineFloor
Share your company name, sales market or project, preferred colors, specification requirements, and estimated quantity. Contact FineFloor to request product information and dealer samples, and discuss bulk purchasing or channel cooperation.