When comparing engineered hardwood flooring, read the oak face thickness and total board thickness as two separate specifications. In FineFloor’s Amara Collection, 4mm describes the sawn-cut oak veneer, while 5/8″ describes the total flooring thickness. Neither figure replaces the other, and neither alone establishes a refinishing allowance, service life, or performance ranking.
For U.S. distributors and large retailers, the practical task is to keep these measurements clear across product sheets, showroom labels, and purchasing records. Using Amara as an example, this guide explains what each number means and how to confirm that the sample, specification, and proposed order refer to the same product.
1. Identify What the 4mm Measurement Describes
The Amara specification lists a 4mm sawn-cut European oak veneer. This is the oak face of the engineered flooring. It is separate from the plywood construction and from the surface finish.
When discussing an engineered wood flooring wear layer, retain the complete product description. “4mm oak face” communicates more clearly than an isolated “4mm” on a sample label. Adding “sawn-cut” also preserves a documented detail that could otherwise disappear when information is shortened for a catalog.
The finish has its own specification: matte UV-cured urethane. The 4mm figure does not describe the coating thickness. Keep face material, face thickness, and finish in separate fields so showroom staff can explain each accurately.
Do not turn the face thickness into a promised number of refinishing cycles. No refinishing allowance has been confirmed in the supplied Amara information.
2. Identify What the 5/8-Inch Measurement Describes
Amara’s 5/8″ measurement is the total board thickness. It describes the flooring as a complete product, rather than the oak face alone.
Write this as “Total thickness: 5/8″” wherever the specification appears. For U.S. channel materials, keeping the supplied inch measurement avoids introducing inconsistent rounded conversions across labels and product pages. The oak face can remain in the commonly supplied 4mm format.
Do not calculate and publish a separate plywood thickness by subtracting the oak face from the total. The supplied specification confirms plywood construction but does not provide a complete layer-by-layer measurement.
Engineered flooring thickness also should not be used by itself to approve an installation. Amara lists glue-down or nail-down installation; request the applicable instructions when reviewing a particular application.
3. Put Both Measurements in One Purchasing Record
A consistent record makes it easier to compare proposed products without confusing face thickness with total thickness. Use the following checklist when reviewing Amara documentation.
| Item | Confirmed Amara information | What the buyer should check |
|---|---|---|
| Product identity | FineFloor, Amara Collection, selected color | The sample and documents identify the same selection |
| Oak face | 4mm sawn-cut European oak veneer | The figure is labeled as face thickness |
| Total thickness | 5/8″ | The figure is labeled as total board thickness |
| Construction | Plywood | No unconfirmed layer configuration has been added |
| Finish | Matte UV-cured urethane | Finish is recorded separately from the oak face |
| Texture and edge | Light wire brushed; micro bevel | Descriptions remain consistent across materials |
| Grade | Natural Grade | No unsupported letter-grade conversion is introduced |
| Width × length | 10.25″ × 86.6″, approximately 260 × 2200mm | Width and length are clearly identified |
| Box information | 36.942 sq.ft.; 73.41 lbs. per box | Coverage and weight remain separate fields |
| Installation | Glue down or nail down | Applicable instructions are requested |
| Warranty | 50-year residential / 5-year light commercial | Subject to warranty terms and conditions |
This checklist records the documented configuration. It does not rank Amara above another construction or establish that products with similar dimensions are interchangeable.
4. Connect the Specification to Samples and Display Labels
A color sample and a technical record answer different questions. The sample helps buyers review appearance; the record identifies the configuration being discussed. Keep them connected through a clear product and color name.
For example, Laguna offers a light natural oak appearance with soft warmth and fine grain. Its color can support modern residential, Scandinavian, and open-plan display references, while its thickness information belongs on the accompanying specification card.
Use Laguna Light Natural European Oak Flooring as the product reference when sharing the details of that selection.
A concise display label could read:
FineFloor Amara — Laguna
European Oak | 5/8″ Total Thickness | 4mm Sawn-Cut Oak Face
Matte UV-Cured Urethane | Light Wire Brushed
Review physical samples to confirm color and surface appearance. Natural grain and tonal variation remain part of the product; a photographed board should not be presented as an exact appearance guarantee.
5. Ask Separate Questions About Warranty and Related Products
Keep warranty language separate from thickness explanations. Amara carries a 50-year residential / 5-year light commercial warranty, subject to warranty terms and conditions. This is not a statement that a 4mm face guarantees a particular service life.
The same discipline applies when a buyer asks about coordinated flooring and stairs. In the separate red oak reference supplied, the three-meter flooring has a 20mm total thickness and 6mm oak face, while the stair treads and stair risers have a 20mm total thickness and 2mm oak face. Equal total thickness does not mean equal face thickness.
Those products are separate from Amara. Their coordination concerns color, species, and overall appearance; it does not establish an Amara stair option.
Discuss Your Flooring Specification with FineFloor
Send your company name, sales market or project, preferred colors, required specifications, and estimated quantity. Contact FineFloor to request product documents and dealer samples, and discuss bulk purchasing or channel cooperation.
6. Frequently Asked Questions
Is a 4mm oak wear layer the same as a 5/8-inch board?
No. For Amara, 4mm describes the sawn-cut oak face, while 5/8″ describes the total board thickness. Record both measurements separately.
Does the 4mm figure describe the finish?
No. It describes the oak veneer. The listed finish is matte UV-cured urethane and should appear in its own specification field.
How many times can this flooring be refinished?
The supplied information does not confirm a refinishing allowance. Do not calculate or promise a number of cycles from the 4mm face thickness.
What should channel buyers request before confirming a purchase?
Request the selected color’s product specification, dealer sample information, applicable installation instructions, and warranty terms. Confirm that all documents and samples refer to the same product configuration.